Storing Sounds - GEM GPS3600 Owner's Manual

Storing Sounds

Whenever you edit a sound you will, at some
point, decide that you either want to save your
new sound or simply forget it and return to using
the instrument as before. A modified Sound that
has not been stored to memory shows a small
mark at the top left hand corner before the name.
To cancel an edit, simply press the EXIT button
and confirm with ENTER to return the main Edit
menu This will cancel your edit and return the
sound to its starting status.
If you decide you want to store your sound into
the instrument's memory, the next step will be to
press the SAVE button (F8).
Any sound that you create yourself can be stored
in Sound Group families, (or "Banks"). During
the storing process, you will first be asked to se-
lect a destination for your new sound and then
given the opportunity to name it.
1. Press the soft button F8 to select "Save" from
the main Edit Sound menu.
The «Bank Prog. Change» window opens
where you can select the destination of the
new Sound in the PS/GPS Sound library.
The PS/GPS Sounds are stored in the order
of Bank Select and Program Change num-
bers. You can choose to store the modified
sound with its original name, or with a new
name.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2•40 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
RAM-Sounds based on ROM-Wavesamples
are saved with an asterisk (*) attached after
the name to identify the Sound from the origi-
nal. New sounds based on new
Wavesamples loaded from disk or created
with the Sample Translator are called
RAM Sounds, identified by the small
graphical representation of a wave (
2. Use the directional arrows to select the "Bank"
and "Prog. Change" entry zones and rotate
the Dial to select the numbers correspond-
ing to an empty location (shown as "No
Sound").
3. To change the Sound's name, press the Soft
button F7/F8 .
Use the standard name entry procedure (see
"Alphanumeric Entry" on page 1.10 of the
Quick Guide).
Press ENTER to confirm the new name.
4. Press ENTER again to memorize the Sound
to the selected location.
○ ○
).