Layering Presets And Preset Variations Page-4; Split The Keyboard Page-4; Balance: Balancing The Sounds Volume In Layer Mode - GEM Prp700 Owner's Manual

owners manual
Layering presets and preset variations
You can use both, preset and preset variation to create a Layer. Press PIANO1 and STRINGS1 but-
tons and then press the VARIATION button.
Main sound PRESET
Layer VARIATION
Pressing the VARIATION button for the fi rst time,
the variation in the layer sound is selected.
NOTE: Pressing any of the enabled preset buttons, the current preset will switch back to Single mode.
Split the keyboard
The piano keyboard can be divided (split) in two parts. The instrument will automatically assign to
the left part an appropriate bass sound. Press the SPLIT button to divide the keyboard, enabling the
split section.

BALANCE: Balancing the sounds volume in layer mode

Using a layer sound is possible to modify the volume volume between the two sections. Press the
BALANCE DATA buttons. The fi rst time you press the button the display shows the current balance
value. The next touch modifi es the balance ratio.
Etc.
Page4
Decrease Increase
BALANCE
value value
DATA
Main sound VARIATION
Layer VARIATION
Pressing the VARIATION button for a second time,
the variation in the main sound is selected.
BALANCE VALUE RANGE
Prp700-Prp800
31= Max. Lev. for the MAIN,
Min. Lev. for the LAYER
0=Max. Level for MAIN and LAYER
-31= Min. Lev. for the MAIN,
Max. Lev. for the LAYER