Alphanumeric Entry - GEM GPS3600 Owner's Manual

ALPHANUMERIC ENTRY

In name writing situations (Preset name, Song name, etc.), the keyboard activates as a source of alpha-
numerical data where each note of the central zone of the keyboard corresponds to a letter, symbol or
number. Use the Left/Right Cursor buttons [ / ] or the DIAL to navigate within the active name writing
zone.
The following example shows how to modify a
Preset name:
1. Press the STORE PRESET button. An entry
zone appears showing the status of the cur-
rent Preset:
2. Press the Soft buttons F7 or F8 to activate
the "Change name..." function. A second
entry zone appears where a name can be
inserted. The current name appears selected
(shown in negative highlight).
3. To completely cancel the selected name, in-
sert the first character. To change one or
more characters only, move the flashing cur-
sor with the cursor buttons.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1•10 Quick Guide
ALPHANUMERIC CONFIGURATION IN NAME-WRITING MODE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4. Insert the desired characters using the key-
board. Each note corresponds to a charac-
ter, processing command or number.
Two options appear below the name ("Caps
On/Caps Off" and "Insert/Overwrite") which
can be enabled or disabled with notes D2 and
D#2 respectively.
The notes on the extreme left of the keyboard
zone provide word processing functions:
• D2:
• D#2:
Insert / Overwrite mode;
• E2:
between two entries;
• F2:
character or the one after;
• G2:
the previous character;
5. Move back with the left Cursor button [ ] and
correct wrong characters. In Overwrite mode,
the inserted characters substitute the se-
lected characters (in negative highlight).
6. Press ENTER to confirm and to close the
active zone, or press ESCAPE to cancel and
close the window.
○ ○
CAPS - Caps On / Caps Off;
INS/OVER - toggles between
SPACE - inserts a space
DELETE - cancels the selected
<— (BACKSPACE) - cancels