Table of Contents
Advertisement
Step
How to:
Arm your system in the "Away Mode"
1.
Close all protected doors and windows, ensure everyone has left the premises.
Ensure the status light is lit green.
2.
[AWAY]
Press [Away].
OR
[?]-[?]-
Enter your user pin code.
[?]-[?]
3.
Vacate the premises immediately.
Stay Arming
Stay arming is used when you are staying in the premises and wish to arm
certain zones and bypass others IE: Arming the perimeter of the premises, whilst
automatically bypassing all the internal movement sensors. If an armed zone is
alarmed whilst your security system is in the stay mode, it will initiate a warning
tone at your NX-1815E and your sirens will sound at the end of this warning.
Your service provider predetermines this warning time at the time of installation.
Step How to:
Arm your system in the "Stay Mode"
Close all protected doors and windows. If motion sensors are included in your "Stay mode"
1.
have everyone move out of those partitions.
Ensure the status light is lit green.
2.
[STAY]
Press [Stay].
3.
Your security system is now armed in the stay mode.
Disarming
Make your way to the NX-1815E through one of the designated entry / exit doors.
When you are detected entering, your NX-1815E will repeat a warning message
for the duration of the entry delay until a valid PIN code is entered. Your sirens
and communicator will activate at the end of the entry delay time if a valid PIN
code is not entered. Away and Stay modes can be configured with different entry
delay times, ask your service provider for further details.
Step How to:
Disarm your system from either the "Away" or "Stay" Modes
Enter the premises through your designated entry door/s. If your security system has been
designed to detect your presence when making your way to the NX-1815E, a warning
1.
message reminding you to turn off your security system will be announced. If your
presence is not detected, no warning message is announced.
[?]-[?]-
Enter your user PIN code to disarm from either the away or stay arming
2.
[?]-[?]
modes.
Your system is now disarmed from either the Away or Stay modes.
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
9
Advertisement
Table of Contents
