Basic System Configuration – Menu 9
Menu 9
Use this menu to
•
Adjust / set the time and date to match your location
•
Change entry and exit times to suit your requirements
•
Adjust volume levels
•
Adjust backlight levels
•
Select different voice options
•
Reset detectors that have latched in alarm
Some detection devices such as smoke detectors, shock sensors and
Note:
some glass break detectors latch their alarm lights to indicate an alarm condition.
These types of detectors require resetting, use the "Reset Detector in Alarm"
menu to acknowledge and clear these lights.
The Call back and call answer options are service tools for your service
Note:
provider and are not listed in these instructions but will be announced when you
enter this menu option.
How to: Setting the time and date
Step Example:
1.
[MENU] - [9]
2.
[1]
3.
[?]-[?]-[?]-[?]
4.
[1]
5.
[9] - [ENTER]
6.
[30]-[ENTER]
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
-
Basic system configuration
1
Time and date
2
Partition entry time
3
Partition exit time
4
Keypad light intensity
5
Voice options
6
Reserved
7
Reset detector in alarm
8
Call back
9
Call answer
0
Volume level
Setting the time as 9.30AM, and the date as 19.6.2009
Selects main menu - Option 9, Basic system configuration.
Selects time and date configuration.
Enter your Master user pin code.
To configure the time.
Enter the current hours value, i.e., 9 o'clock.
Enter the current minutes value, i.e., 30 minutes.
21