User Configuration - Menu 5 - Interlogix NX-1815E User Manual

User Configuration – Menu 5
Menu 5 -
The user configuration menu is where user authority levels, PIN codes and
partitions are assigned to users of your security system.
User PIN – This is the code used to arm and disarm partitions within your
security system. They are generally four digits in length, but can be configured by
your service provider to be six digits in length if this level of security is required.
User Partition - Assigning different partitions to users s which sections (partitions)
of the security system a user may access to.
User Authority - Authorization levels determine the options available to user,
user authorization is where you would alter and increase a users authority to
become a Master Code. Users with Master PINs can create, delete and modify
other user codes with equal or less authority than themselves.
How to: Configure (set up) a new pin code for a specific user
Step Example:
1. [MENU] - [5]
2. [?]-[?]-[?]-[?]
3. [1]
4. [4] – [ENTER]
[2]-[5]-[8]-[0]
5.
[ENTER]
6. [MENU]
7. [MENU]
8. [MENU]
How to: Delete a pin code from a specific user
Step Example:
1. [MENU] - [5]
2. [?]-[?]-[?]-[?]
3. [1]
4. [4] – [ENTER]
5. [0] - [ENTER]
16
User Configuration
1 User PIN
2 User Partition
3 User Authority
Configure pin code 2580 for user 4.
Selects main menu - Option 5, User configuration.
Enter your Master pin code.
Selects to configure user pin.
Selects user 4.
Sets user 4 pin code as 2580.
Moves back to user configuration (step 3).
Exits back to main menu.
Press menu to exit.
Delete the pin code that is configured for user 4.
Selects main menu - Option 5, User configuration.
Enter your Master pin code.
Selects to configure user pin.
Selects user 4.
To disable user.
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual