Indicators, Icons And Lights; Away Arming - Interlogix NX-1815E User Manual

Indicators, Icons and Lights

Green
Yellow
Red (Flashing) One or more zones are in alarm condition.
Red (Steady)
To hear system messages, press the status key.
Green
Off
Red
Green
Off
Yellow
Green
Red
On
Off
MENU Access main menu, and when prompted allows users to exit sub menus.
ENTER Enters selected option, use when prompted
Partition Off
LEDs
Yellow flashing
1 - 16
Yellow steady

Away Arming

Away arming is used when you are leaving and you want the premises protected
in your absence. If your service provider has enabled the "forced arming" feature,
you will be able to arm your security system with pre-programmed zones not
secure. This feature is ideal for systems that have entry / exit doors fitted with
door contacts, allowing you to arm your system with the door opened, and
protecting the door after its closed. Your NX-1815E will announce all zones that
are not secure when armed. You may arm your system by entering your 4 or 6
digit user PIN code, or if your service provider has enabled the quick arm feature,
you can simply press the Away key.
8
System is ready.
System message present.
System trouble message present.
Partition is disarmed.
Partition is not ready to arm, check zones.
Partition is armed in the "AWAY" mode.
Partition is disarmed, and is ready to stay arm.
Partition is not ready to stay arm, check zones
Partition is armed in the "STAY" mode.
OK
Fire condition present
Mains power is connected
Mains power is disconnected
Zone is OK
Zone is activated (open)
Zone is bypassed (isolated)
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual