Table of Contents
Advertisement
The system must be disarmed before accessing user configuration.
Notes:
Do not remove all partitions from a users partition control. Use extreme caution
when modifying a user with master code authority.
If you attempt to enter a PIN code that is already being used by another user, the
following announcement will be heard "PIN code has failed" followed by three
fast beeps, simply select another PIN code.
Keep user PIN information in a safe place, do not disclose your PIN to others.
Contact your service provider to confirm available PIN codes and partitions on
your system.
Phone Number Configuration – Menu 6
Menu 6
-
Phone number configuration
1
2
3
7
8
9
Menu 6 − Alarm phone numbers − will only be available if your system is
configured for self monitoring (also known as domestic dialling). If self-monitoring
is enabled, and a suitable connection to the telephone network is available, your
security system has the ability to call three different numbers in the event of an
alarm condition, these are alarm phone numbers 1,2 and 3.
A siren tone will be heard by the receiving party, and the call can be terminated
(ended) by pressing and holding the star key on the receiving phone.
Caution should be used when selecting self-monitoring, as it does not offer the
same level of protection provided by a professional monitoring station.
Divert phone numbers 1, 2 and 3 will be called when an intercom call is initiated
from an outdoor intercom entrance station.
How to: Enter phone numbers
Step Example:
1.
[MENU] - [6]
2.
[?]-[?]-[?]-[?]
3.
[1]
Phone
4.
Number
18
Alarm phone number 1
Alarm phone number 2
Alarm phone number 3
Divert phone number 1
Divert phone number 2
Divert phone number 3
Programming in alarm phone number 1.
Selects main menu - Option 6, Phone Number Configuration
Enter your Master pin code.
Selects alarm phone number 1.
Enter the phone number that alarm phone number 1 will dial.
NX-1815E NetworX Voice Keypad with 16 zone LEDs User Manual
Advertisement
Table of Contents
