QUANTA Rackgo X Series F03A Technical Manual page 59

I H I I B
NSTALLING ARDWARE NSTALLING THE NTERPOSER OARD
1. Align the interposer board with the connector on the mainboard and slide until it is
seated correctly.
2. Tighten the captive screw.
3. Lift the sled tray and align it with the chassis bay.
4. Slide the sled tray in the chassis. See Securing a Sled Tray on page 2-2.
Figure 2-42. Installing the interposer board
2-30