Bios Setting Utility; Bios Recovery - QUANTA Rackgo X Series F03A Technical Manual

BIOS U U
PDATE TILITY
Microcode updates

ME Firmware


BIOS Setting Utility

Use AMISCE to import/export BIOS setting in Linux:
1. Export BIOS setting and generate script file:
/o /s NVRAM.txt
2. Import BIOS setting with script file:
/i /s NVRAM.txt

BIOS Recovery

If BIOS update procedure is interrupted then system will stop at 0xF2 POST code when
reboot up, in this case please follow the steps to recover BIOS.
1. Plug-in the recovery media with AMIBOOT.ROM file.
- Rename BIOS_NAME.ROM to AMIBOOT.ROM and copy into USB disk root directory,
plug-in system.
2. Power on the system.
3. System will automatically boot into BIOS setup menu [Recovery] page.
Main Advanced
WARNING! BIOS Recovery mode has been detected
Flash Update Parameters
Reset NVRAM
Proceed with flash update
3-43
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Boot Security Recovery
[Enabled]
Version 2.14.1219 - Copyright (C) 2011 American Megatrends, Inc.
Figure 3-38. BIOS Recovery Menu
Event Logs Save & Exit
Set this option to
reset NVRAM to
default values
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
BIOS