Europe (Ce Declaration Of Conformity); Vcci (Japan); Bsmi (Taiwan); Regulated Specified Components - QUANTA Rackgo X Series F03A Technical Manual

VCCI (J )
APAN

Europe (CE Declaration of Conformity)

This product has been tested in accordance too, and complies with the Low Voltage Direc-
tive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the
CE Mark to illustrate its compliance.

VCCI (Japan)

English translation of the notice above:
This is a Class A product based on the standard of the Voluntary Control Council for Inter-
ference (VCCI) from Information Technology Equipment. If this is used near a radio or tele-
vision receiver in a domestic environment, it may cause radio interference. Install and use
the equipment according to the instruction guide.

BSMI (Taiwan)

The BSMI Certification Marking and EMC warning is located on the outside rear area of the
product

Regulated Specified Components

To maintain the UL listing and compliance to other regulatory certifications and/or decla-
rations, the following regulated components must be used and conditions adhered to.
Interchanging or use of other component will void the UL listing and other product certifi-
cations and approvals.
Updated product information for configurations can be found on the site at the following
URL: http://www.QuantaQCT.com
If you do not have access to the Web address, please contact your local representative.
Add-in cards: must have a printed wiring board flammability rating of minimum

UL94V-1. Add-in cards containing external power connectors and/or lithium batter-
ies must be UL recognized or UL listed. Any add-in card containing modem telecom-
munication circuitry must be UL listed. In addition, the modem must have the
7-2
R C
EGULATORY AND OMPLIANCE
I
NFORMATION