Design Shaping - Husqvarna Royale User Manual

DESIGN SHAPING

Embroidery Edit.
the baseline in the order that they were loaded into
Embroidery Edit. The designs will follow the line in
the direction indicated by a small arrow by the shapes.
shape on the screen to increase or decrease the size of
the shape. If you position or rotate the shape, it will
Select spacing
appear allowing you to choose how to spread out your
objects will begin loading to the left. If you touch Right
The spacing between the objects can then be increased or
distance between all objects.
Note: The Spacing control will only be visible when Left or Right
the shape. The baseline will change to a black color again.
7:12
7 Embroidery Edit
Select spacing
Select side
positioning
Select design
angle
Select line
Position
positioning
Rotate
Scale
Control center
Baseline
Shapes
Control
Point
Delete Last
Object
Set Number
of Objects
Duplicate
Last Object
Pan