Smart Save - Husqvarna Royale User Manual

SMART SAVE

can now turn the machine off.
adjustments and you can continue to embroider later.
Note: If you have chosen Auto Smart Save in the SET Menu, the
Smart Save icon will be disabled. The design info is automatically stored
periodically as you embroider. If you should turn your machine off or
loose power, it is easy to bring up the design ready to stitch from the
same position. Go to the Designs Menu at the bottom of the Designs,
and touch the Load Smart Save icon.
CORNER CHECK
Corner Check can be used to trace the four corners of the
design so that you can see where the design will be on the
fabric. Touch the corner check icon. Each time you touch
left, upper right, lower right, lower left and then go back to
the current stitch position.
MOVE HOOP
arm to different positions.
Current Stitch Position
When you want to return to the current stitch position
and continue embroidering where the embroidery was
current stitch position and start to embroider.
Park Position
hoop and select Park Position. The embroidery arm will be
placed in the correct position for storage.
embroidery arm out of the way for sewing.
Note: It is important that the hoop is removed before selecting Park
Position to prevent damage.
Bobbin Position
Note: You can also touch the Stitch-ReStart button on your machine
to move the hoop to bobbin access position.
8 Embroidery Stitch-Out
Smart Save
Load Smart Save
Trim Position
it easier to trim your jump stitches and trim fabric for
Note: You can also use touch the Needle Up/Down button on your
machine to move the hoop to trim position.
Center Position
Use the Center Position if you want to check where the
center position of the design will be placed on the fabric.
8:3