Removal Procedure; Replacement Procedure - IBM 6151 Maintenance And Service Manual

Removal Procedure
1. Set the power switch on the system unit to Off.
2. Do the Rear Cover Removal procedure.
3. Disconnect the cable from the M connector on the rear of the
system unit.
4. If present, remove the clamping device and disconnect the IBM
5083 Tablet cable.
5. Disconnect the Stylus or Cursor from the front of the IBM 5083.
Replacement Procedure
1. Connect the Cursor or Stylus into the connector on the front of
the IBM 5083.
2. If present, connect the IBM 5083 cable connector to the cable
included in the Tablet Cable Kit and install the clamping
device.
3. Connect that cable to the M connector on the rear of the
system unit.
4. Do the Rear Cover Replacement procedure.
5. Set the power switch on the system unit to On.
10-145-2 Service Manual