IBM 6151 Maintenance And Service Manual page 320

Step 7
1. Install the top cover. If needed see Section 4.
2. Run xxK Bytes of IBM AT Memory Checkout. If needed see
page 2-17.
TESTING COMPLETE
Press Enter to continue.
DIAG-2
WERE YOU ABLE TO LOAD AND RUN THE "SYSTEM
CHECKOUT" AND DID THE "NO TROUBLE WAS FOUND"
MESSAGE DISPLAY?
YES This completes the repair.
NO
If the System Checkout resulted in the same SRN that you
have been analyzing, go to "Unresolved Problem PIC 0060"
on page 3-0060-1 otherwise go to "Problem Determination
Procedure PIC 0030" on page 3-0030-1
3-2100-8 Service Manual