IBM 6151 Maintenance And Service Manual page 453

3. Connect the power cables to the system board (2), the fixed-disk
drive, and the diskette drive.
4. Connect the signal cables and ground wire to the fixed-disk
drive and the diskette drive.
5. Install the cooling fan assembly (page 4-39).
6. If present, connect the display power cable to the power supply.
7. Connect the external power cable to the power supply.
8. Do the "Top Cover Replacement" on page 4-13.
Power Connector
~
mrn
~
[llillm]
Power Connector
AJZB033
(6/88) Removal and Replacement 4-43