IBM 6151 Maintenance And Service Manual page 742

The Error Report Command
The AIX Operating System recognizes the errpt command to
display or print an error report. The errpt command is entered
when the
#
or
$
prompt is displayed by the AIX Operating System.
The errpt command has several extensions to define the type
report you want, type errors included, time period, and other limits
on the data included.
The extensions described here are for service related information.
If you need more information, see Error Log Command Examples in
this appendix or see the A/X Operating System Commands
Reference manual.
Use the following format and explanations as an example.
errpt ff ff ccc,ttt ffMMddhhmmyy ffMMddhhmmyy
I
ddddd
C-4 Service Manual
ff
ccc
The flags are used to select the type report and the
limits desired.
-a Produces a detail report.
-d Limits the report to a certain class (ccc) and type
(ttt) of error. Separate the class and type with a
comma.
-e Include entries with earlier date and time.
-n Include only entries from a specific node.
-s Include entries with later date and time.
The class of errors included in the report.
hOO All hardware errors. These errors are normally
caused by the hardware or media.
sOO All software errors. These errors are normally
caused by the software programs.
iOO All IPL/shutdown errors. These are not errors
but provide data on the date and time a
shutdown or IPL occurred.