Room Monitor Feature - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-4E 02.6.4 3:43 PM ページ 58

Room Monitor Feature

This feature allows you to monitor a room through the handset or the base
unit by using the intercom feature. For example you can monitor a baby
from different areas of the house. You can call the handset or the base unit
using the extension number, to monitor the room. The called unit will not
ring. When the system has one or more additional handsets (p. 28), a
handset user can monitor through another handset. If you allow other users
to monitor through your handset or base unit, turn the feature on. If you
want to prevent your unit from being monitored by other extensions, leave
this feature off (factory preset). The destination unit must not be used
and the destination handset must be off the base unit (p. 59).
To turn the handset Room Monitor feature on
(to allow other users to monitor through your handset)
Make sure the handset is not being used.
(CONF/FUNCTION)
1
Press
"Initial setting" by pressing
(‹)
, and press
2 Scroll to "Room monitor" by pressing
(‹)
or , and press
3 Select "On" by pressing
press the right soft key (
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥To prevent your handset from being monitored, select "Off" in step 3 and press
the right soft key (
To turn the base unit Room Monitor feature on
(to allow the handset to monitor through the base unit)
Use the handset. Make sure the base unit and the handset are not being used.
(CONF/FUNCTION)
1 Press
(›)
pressing
2 Scroll to "Set base unit" by pressing
(›) (‹)
or , and press
3 Scroll to "Room monitor" by pressing
(‹)
or , and press
4 Select "On" by pressing
press the right soft key (
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥To prevent your base unit from being monitored, select "Off" in step 4 and press
the right soft key (
58
, and scroll to
(›)
(fl)
.
(fl)
.
(›) (‹)
or , and
).
SAVE
).
SAVE
, and scroll to "Initial setting" by
(‹) (fl)
or , and press .
(fl)
.
(fl)
.
(›) (‹)
or , and
).
SAVE
).
SAVE
Copy directory
or Initial setting
1
2Way radio mode
(›)
Auto talk
Room monitor
1
Set tel line
Room monitor
:On
4 3
S A V E
Set answering
Set base unit
1
Registration
(›)
Incoming call
Room monitor
1
---------------
Room monitor
:On
4 3
S A V E