Troubleshooting - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-7E 02.6.4 3:44 PM ページ 95

Troubleshooting

Cordless Telephone
Problem
"No link to base.
Walk closer to
base and try
again." is displayed and
an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the
base unit does not ring.
The handset display is
blank.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the handset
starts to ring and stops the
program/search.
You cannot make an
internal/external call with
the handset.
Cause & Remedy
≥You are too far from the base unit. Walk
closer to the base unit and try again.
≥Plug in the AC adaptor.
≥Raise the base unit antennas.
≥Locate the handset and the base unit away
from other electrical appliances (p. 3).
≥Walk closer to the base unit.
≥Raise the base unit antennas.
(fi)
on the handset to turn on the
≥Press
Reception Booster feature (p. 31).
≥The ringer volume is OFF. Set to HIGH,
MEDIUM or LOW (p. 20, 21, 61).
≥If more than one other user is using the
handsets and base unit, the handset/base
unit may not ring. Those users will hear
incoming call tones (p. 69) and the IN USE
indicator flashes quickly on the base unit.
≥Charge the battery fully (p. 12).
≥You cannot store an item in the directory
while the handset is in the talk, speakerphone,
intercom, Room Monitor, 2-Way Radio or in
the remote operation mode.
≥Do not pause for over 60 seconds while
storing.
≥To answer the call, press
again from the beginning after hanging up.
≥You cannot make a call when the handset is
in the remote operation mode. Exit the mode
(OFF)
by pressing (p. 77).
≥If the 2-Way Radio mode is on, turn it off
(p. 60).
"
or . Start
95