Installing The Battery In The Handset; Battery Charge - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-2E 02.6.4 3:42 PM ページ 12
" Installation

Installing the Battery in the Handset

Insert the battery into the handset as shown, matching the correct polarity
(1). Press the battery down until it settles into the compartment (2).
When finished, close the cover.
2
1

Battery Charge

Place the handset on the base unit and charge
for about 15 hours before initial use.
≥The CHARGE indicator lights, a beep sounds and
"Charging" will be displayed.
CHARGE Indicator
Battery strength
You can check the battery strength on the handset display.
The battery strength is as shown in the chart below.
Display prompt Battery strength
Fully charged
Medium
Low
Needs to be recharged
Discharged
12