Answering Calls; Handset; Base Unit; Auto Talk - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-3E 02.6.4 3:43 PM ページ 35

Answering Calls

When a call is received, the unit rings and "Incoming call" is
displayed on the handset and the IN USE indicator flashes quickly on the

base unit.

If you subscribe to a Call Display service, the calling party information will
be displayed after the first ring (p. 36). In order to view the Call Display
information, please wait until the second ring to answer a call.

Handset

1 Press .
≥You can also answer a call by pressing any
dialing button (0) to (9), ($) or (#)
(Any Key Talk).
OR
Press , and when the other party
answers, talk into the microphone.
2 To hang up, press

Auto Talk

If you set the Auto Talk feature to ON (p. 19), you can answer a call by
lifting the handset off the base unit without pressing
If you purchase an additional handset (p. 28), you can answer a call by
lifting it off the charger.
Base Unit
(DIGITAL–SP-PHONE)
1 Press
2 Talk into the MIC.
3 To hang up, press
(DIGITAL–SP-PHONE)
≥To transfer a call to another person, see pages 54 and 55.
To transfer a call to a mailbox to allow the caller to leave a message
there, see page 76.
≥When the handset and base unit ringer volumes are set to OFF, they will not
ring (p. 20, 21).
(OFF)
.
.
.
MIC
(OFF)
Microphone
or .
IN USE Indicator
(DIGITAL–SP-PHONE)
35