Number Of Rings - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-2E 02.6.4 3:42 PM ページ 27

Number of Rings

You can select the number of times the unit rings before the Answering
System answers a call, from "2" to "7" or "Toll saver"*.
Your phone comes from the factory set to "4".
Make sure the base unit and the handset are not being used.
(CONF/FUNCTION)
1 Press
2 Scroll to "Initial setting" by pressing
(›) (‹)
or , and press
3 Scroll to "Set answering" by pressing
(›) (‹)
or .
(fl)
4
Press .
(fl)
5 Press at "Number of rings".
≥The current setting is displayed.
6 Select the number of rings by pressing
(‹)
or .
≥You can also select the number of rings by
pressing (0) (Toll saver*), or (2) to (7).
7 Press the right soft key (
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥You can exit the programming mode at any time by pressing (OFF)
*Toll saver
When you call the unit from outside:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
.
(fl)
.
(›)
).
SAVE
Copy directory
Initial setting
1
2Way radio mode
Set tel line
Set answering
1
Set base unit
---------------
Number of rings
1
Recording time
Number of rings
:4
4 3
S A V E
Number of rings
:Toll saver
4 3
S A V E
.
27