Date And Time - Panasonic KX-TG2730CS Operating Instructions Manual

PQQX13405ZA-BM-2E 02.6.4 3:42 PM ページ 23

Date and Time

Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
Make sure the base unit and the handset are not being used.
(CONF/FUNCTION)
1 Press
2 Scroll to "Date and time" by pressing
(›) (‹)
or .
(fl)
3 Press .
4 1 Enter the year, month and date using
4-digit numbers. (e.g. To set Apr. 7,
2002, enter "2002" and "0407".)
2 Enter the time (hour and minute) using
a 4-digit number. (e.g. To set 9:30, enter "0930".)
≥If you enter a wrong number, press (fi) or (fl) to move the cursor to the
incorrect number. Enter the correct number.
5 Select "AM" or "PM" by pressing
6 Press the right soft key (
≥A beep sounds and the clock starts working.
≥If 3 beeps sound, the setting is not correct. Start again from step 4.
≥To exit the programming mode, press (OFF)
≥You can exit the programming mode at any time by pressing (OFF)
≥When entering the time in step 4, you cannot enter numbers greater than 12.
Do not use military time. (To set 13:00 hours, enter "0100", and select "PM" by
pressing ($).)
If a power failure occurs, the time may be shifted. When "
base unit display, adjust the date/time.
To check the date/time
Repeat steps 1 to 3.
≥The date and time will be displayed. When finished, press (OFF).
.
Ringer setting
Date and time
1
Copy directory
Date:2002.01.01
Time:12:00 AM
2 1 0-9=Date&Time
¢=AM/PM
Date:2002.04.07
Time:09:30 AM
2 1 0-9=Date&Time
¢=AM/PM
($)
.
Date:2002.04.07
Time:09:30 PM
2 1 0-9=Date&Time
¢=AM/PM
).
SAVE
.
"
S A V E
S A V E
S A V E
.
" flashes on the
23