Selecting The Number Of Rings.31 - Panasonic KX-TC1891B Operating Instructions Manual

Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from "2" to "7" or "Toll saver"*
Your phone comes from the factory set to 'Toll saver"
-J Press [
FUNCTION/EXIT/CH) ►Save directory
Ringer volume
▼A
►^Yes
Q Press (▼) or 0 repeatedly until the arrow
C-
points to
"Program"
►Program
TA
►-Yes
g Press
FWD/EDIT
(►}
(Yes
key) ►Save DIRECT#
Set flash time
TA
►=Yes
A
Press S or Q repeatedly until the arrow
points to
"TAD program"
Talk switching
►TAD program
TA
►=Yes
JT Press
FWD/EDIT
(►}
(Yes
key)
«The base unit display shows the answering
system function menu
Answering
system setting
See base unit
C Press (D
U
"7 To select LINE 1, press (T)
Base unit display
/ To select LINE 2, press
{2}
•The current setting
of
the selected line is
displayed on the
base
unit
Number of rings
l=Lmel 2=Lme2
O Press (o), or
(2)
to © to set the number of
Base unit display
0 rings
0
Selects "Toll saver"
2-7 The unit will answer after the selected
number of rings
Number of rings
Linel Toll saver
Q Press
FWD/EDIT
(►]
(Save
key)
#A beep sounds
•To program the other line, start again from step 4
•To return to the standby mode, press (FUNCTION/EXIT/CH)
*Toll saver
When you call the unit from a touch tone telephone
If the unit answers on the 2nd ring, there is at least one new message
If the unit answers on the 4th ring, there are no new messages
Hang up when you hear the 3rd ring
This will save you the toll
charge for the call
31