Table of Contents
Advertisement
PQQX14033ZA.book 14 ページ ２００４年６月２１日 月曜日 午後４時１４分
Programmable Settings
Date and Time
We recommend that you set the date and time so that the unit will announce the
day and time each message was recorded when you play back messages.
Press [MENU].
1
Scroll to "Date and time" by pressing [d] or
2
[B], then press Select.
1 Enter 2 digits each for the month, day, and
3
year. (e.g. To set May 15, 2004, enter "05
15 04".)
2 Enter 4 digits for the time (hour and minute).
(e.g. To set 9:30, enter "0930".)
• If you enter a wrong number, press [d] or [B] to
move the cursor to the incorrect number. Enter the
correct number.
Select "AM" or "PM" by pressing AM/PM.
4
Press Save.
5
• The date and time are set and "E" disappears
from the base unit display.
• If the handset beeps 3 times, the date and time
were not set correctly. Try again from step 3.
6
Press [OFF].
• When entering the time in step 3, you cannot enter numbers greater than 12. Do
not use military time. (To set 13:00 hours, enter "0100", then select "PM" in
step 4.)
• When the display language is set to French, you can use military time (see
page 14 of the French Operating Instructions).
The date and time may be incorrect after a power failure. When "E" flashes on
the base unit display, set the date and time again.
To confirm the date and time, repeat steps 1 and 2 above.
• The current date and time are displayed. When finished, press [OFF].
14
Handset
Date and time
Back
Select
L
K
dB
Date:|
1 2.31.2004
Time:12:00 AM
AM/PM
Save
K
L
Example
Date:|
0 5.15.2004
Time:09:30 AM
AM/PM
Save
K
L
Date:|
0 5.15.2004
Time:09:30 AM
AM/PM
Save
L
K
Advertisement
Table of Contents
