Installing The Battery In The Handset; Battery Charge - Panasonic KX-TG5480 Operating Instructions Manual

Installing the Battery in the Handset

Insert the battery (1), and press it down until it snaps into the compartment (2).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 16). Close the cover and charge the handset for 6
hours.

Battery Charge

Place the handset on the base unit
for 6 hours before initial use.
• The unit beeps once, the CHARGE
indicator lights and "Charging" is
displayed.
• When the battery is fully charged,
"Charge completed" is displayed if
there are no new calls in the Caller
List.
Battery strength
You can confirm the battery
strength on the handset
display.
Battery strength is indicated
by the icons shown in the
chart to the right.
For assistance, please call: 1-800-211-PANA(7262)
2
1
Display prompt
1
2
3
3
(flashing)
4
Installation
CHARGE Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Discharged
15