Record & Playback; Record - EverFocus ENVR8304X 04CH User Manual

6.2 Record & Playback
You can configure the basic recording settings on the hard disk. You can also configure the settings
for Quick Archive and Quick Playback.

6.2.1 Record

Record Overwrite: Check the box to overwrite the hard disk when it is full. Note that unless
this box is checked, or the NVR will stop recording when the hard disk is full. The use of record
overwrite is strongly recommended. If you do not use this feature, please be sure to enable
the Event setting for Disk Full for notification (see 6.3.4 Other).
Schedule Record: Check the box to record by the schedule. Please see 6.7 Schedule for more
details.
Record Status Relay Output: Select a number to monitor the recording status of the selected
alarm relay. The recording status of the selected alarm relay will be transmitted to the alarm
output device.
Auto Erase Video: The hard disk will automatically erase video after it has been on the hard
drive for the selected number of days. To use the maximum hard drive space, choose "OFF".
(See Record Overwrite and notes above.) This feature is useful if local rules and regulations
require recorded video to be discarded after a specific number of days, or to limit the
retention of older recorded video to clear space in anticipation of event recording.
83
ECOR HD 16X1 DVR