System Setting; Date/Time - EverFocus ENVR8304X 04CH User Manual

6.8 System Setting

You can configure the general settings for the NVR in this menu.

6.8.1 Date/Time

You can set up the date and time for the NVR.
Note: Clicking Save at this page will disable the Daylight Saving function if this function
has been enabled and a notice message will pop up as "Please enable the Daylight
Saving Time again if the function is needed". Therefore, after setting up the time at this
page, you need to go to Daylight Saving page to reset and enable the daylight saving
time if the function is needed. Please refer to 6.8.2 Daylight Saving for detailed
information.
Date: Click to bring up the on-screen keyboard to set up the date.
Time: Click to bring up the on-screen clock to set up the time.
Date Format: Select a date format from the drop-down list.
Time Format: Select a time format from the drop-down list.
Time Zone: Select a time zone for the NVR to adjust to when updating from the time server.
NTP: Select Disable / Enable for NTP time synchronization.
NTP Server: Displays the time server address that the NVR uses for time synchronization.
Requires operating network configuration and WAN or LAN access to a compatible NTP server.
120
ECOR HD 16X1 DVR