Ez Hopper - EverFocus ENVR8304X 04CH User Manual

6.1.9

eZ Hopper

You can just use one mouse to control up to 16 DVRs/NVRs in the same LAN network by
enabling the eZ Hopper function.
Note: Before using this function, you need to set up all the monitors to be the same
resolution, please refer to 6.5.1 Monitor OSD.
Main Server
Monitor 1
Set up one DVR or NVR to be the Main Server, and the rest to be the Sub Servers. Then, you
just need to connect a mouse to the Main Server, and you will be able to move its cursor
across all the connected monitors of the Main and Sub Servers and to control their OSD
menus respectively.
Follow the steps below to set up the eZ Hopper function:
For the Main Server:
1. Select Main Server in the Mode drop-down list, and check the Enable box.
One Mouse Control All DVRs and NVRs
Applies for 960 series / eZ.HD series / ENVR8304 series / EPHD08+
Sub Server 1
Monitor 2
80
ECOR HD 16X1 DVR
Sub Server 15
Monitor 16