Table of Contents
Advertisement
Tracking : Click the Tracking button to set up the tracking function which is functional only when
the selected PTZ camera is equipped with the tracking function.
To set up the Auto Tracking function:
3.
Auto Tracking Start Point: Check the box to enable a camera position to which the camera
will return to after a tracking operation. Use the direction buttons to adjust the camera view
to a desired position where you want to set up the position as the Auto Tracking Start Point.
You can select the pan / tilt speed from the Speed drop-down list for controlling the direction
buttons. Adjust zoom, focus and Iris if necessary. Click Set to set the position as the Auto
Tracking Start Point.
Note: If the user did not set up a start point or the start point is disabled, the camera will go
back to track/monitor the initial point instead of the Auto Tracking Start Point, once the
tracked object exits in the camera's field of view.
4.
Pan/Tilt Limit: Check the box if you want to create a zone where the camera will track the
movement inside the zone only. Before clicking the Upper/Lower/Right/Left buttons, use the
direction buttons to adjust the camera view to a desired position where you want the camera
to track the movement in that zone. You can select the pan / tilt speed from the Speed
drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if necessary.
Click the Upper/Lower/Right/Left buttons to set up the Pan/Tilt limits (Left and Right for the
Pan limit; Upper and Lower for the Tilt limit).
153
ECOR HD 16X1 DVR
Advertisement
Table of Contents
