EverFocus ENVR8304X 04CH User Manual page 28

ENVR8304X 08CH / ENVR8304X 16CH:
Mouse / EKB200
1
4
3
Power Cord
Router / Switch
IP Cameras Web Remote
Client
1. Optionally connect a mouse or a keyboard (EKB200) to the NVR to control the system. You can
also control the system using the supplied IR Remote Controller.
2. Connect a microphone to the Audio-in RCA socket of the NVR. Note that the microphone with
a (built-in) amplifier and external power supply is required.
3. Using the supplied Power Cord, connect one end to the 100-240 VAC~ port on the NVR and
the other end to the 100-240 VAC~ power outlet.
4. To connect IP cameras, please use a router or switch to connect between NVR and IP cameras.
5. To manage the NVR over network, use a standard RJ-45 CAT5 10/100/1000Mb Ethernet cable
to connect the WLAN port of the NVR to the network. Please refer to 2.5 Connecting the NVR
to the Network.
6. To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note that
the speaker with a (built-in) amplifier and external power is required.
7. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
Line Level
Audio In
2
5 6 7
Network
CMS:
Line Level
Genie XMS
Audio Out
Main Monitor
(VGA)
19
ECOR HD 16X1 DVR
Main Monitor
(HDMI)