Ptz - EverFocus ENVR8304X 04CH User Manual

7.4 PTZ

You can use the PTZ Control Panel to control the connected PTZ cameras, to set Preset setting and
to activate the configured PTZ settings. You can also connect to an EverFocus' EKB200 keyboard to
a computer to control the PTZ camera.
To control the PTZ camera:
1. Select a connected PTZ camera in the Camera drop-down list first.
2. To move the camera to the desired direction and angle, click the Direction buttons.
3. To zoom in / out the camera view, click the Zoom buttons.
4. To adjust the camera focus, click the Focus buttons.
5. To adjust the Iris open to increase / decrease the amount of light in, click the Iris buttons.
6. To program a Preset Position (if supported by the camera):
a. Move the PTZ camera to the desired position.
b. Click the Preset button.
c. Set up a preset number for the current position by clicking the number buttons. The
number will be displayed in the number box.
d. Click the Set button to save the settings.
7. To jump to a Preset Position:
a. Click the Preset button.
b. Click the desired Preset number.
c. Click the Go button.
157
ECOR HD 16X1 DVR