Toshiba e-STUDIO2330C Service Handbook page 506

Page
3-36 The codes 7808 and 7809 have been added in the table in "3.2.7 Sharpness adjustment".
3-37 The content of the "Remarks" field in the table in "3.2.8 Setting range correction" has been
changed.
3-43 The note in "3.2.17 Black header density level adjustment" has been deleted.
Descriptions for the codes in "3.2.19 Judgment threshold adjustment for blank originals"
have been corrected.
3-45 "SRAM board(LGC board)" has been changed to "SRAM board(LGC board, SYS board)".
3-50 "3.3.4 Adjustment of smudged/faint text" has been changed to "3.3.4 Adjustment of faint
text".
Descriptions for the codes in "3.3.4 Adjustment of faint text" have been changed.
3-54 Descriptions for the codes in "3.3.14 Sharpness adjustment" have been corrected.
The default value has been added in the "Remarks" field in the table in "3.3.15 Offsetting
adjustment for background processing".
An operational procedure has been added in "3.3.15 Offsetting adjustment for back-
ground".
3-56 The content of the "Remarks" field in the table in "3.4.2 Density adjustment" has been cor-
rected.
3-59 Descriptions for "3.4.6 Setting range correction" have been corrected.
The content of the "Remarks" field in the table in "3.4.6 Setting range correction" has been
corrected.
3-76 Descriptions in the adjustment procedure (1) have been changed.
5-9 The description about the e-STUDIO2330C has been added in the table in No. 1 in Notes.
The model name "e-STUDIO2330C" has been added in No. 2 in Notes.
The model name "e-STUDIO2330C" has been added to the name of the service parts list in
No. 5 in Notes.
5-16 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table.
5-17 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table.
5-20 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table.
5-21 The amount of grease to be applied has been changed.
5-23 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table..
5-26 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table..
5-27 The number of sheets for replacement for the e-STUDIO2330C has been added in the
"x 1,000 sheets" field in the table..
5-28 "Fuser belt thermopile (center/rear)" has been added in the table as "M14".
5-29 Descriptions for cleaning the fuser belt thermopiles have been added.
5-35 The part name of the ozone filter 1 has been changed from "FLTR-OZN-F380" to "FLTR-
OZN-45X-CB0-600M".
The slit glass cleaner pad has been added in the "Component" field for DEV-KIT-FC28K.
5-36 A harness jig for the converter board has been added as No. 14 in the "Maintenance Part
List" table.
Descriptions under the Table have been changed.
5-37 The illustration of a harness jig for the converter board has been added.
5-38 The model name "e-STUDIO2330C" has been added to the name of the service parts list
under the table "5.9 Grease List".
Descriptions for the e-STUDIO2330C have been added in "5.10 Operational Items in Over-
hauling".
6-68 The model name "e-STUDIO2330C" has been added in the troubleshooting procedure for
[CA10].
7-1 The illustration in Fig. 7-1 has been corrected.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD
Ver.02 <2008.06.26>
Contents
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
6