Scanner Rom - Toshiba e-STUDIO2330C Service Handbook

8.3.1

Scanner ROM

Important:
• Be sure to shut down the equipment before installing and removing the download jig.
• Do not shut down the equipment during the update. The data could be damaged and not be
operated properly.
[A] Update Procedure
(1) Install the ROM to the download jig (K-PWA-DLM-320).
Make sure the direction is correct.
(2) Press the [ON/OFF] button on the control panel to shut down the equipment.
(3) Take off the right upper cover.
(4) Remove the cover plate.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
Right upper cover
Fig. 8-15
Cover plate
Fig. 8-16
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
8 - 32