Destination List; Send As E-Mail - Kyocera 5550ci Operation Manual

Send as E-mail

Sends a scanned original image as an E-mail attachment.
NOTE:
Access the Command Center RX beforehand and specify the settings required for sending e-mail. For
details, see Command Center RX (Settings for E-mail) on page 2-24.
Enter Destination.
E-mail Address Entry
E-mail
Address
Add a new e-mail destination.
Press [E-mail Address], then enter
the address using the keyboard screen.
Add to Addr Book Next Dest.
Status
Destination
ABCD abcd@efg.com
TUVW 192.168.188.120
Group1 Group1
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Org./Sending
Data Format
Status
Destination
Cancel OK
10/10/2010 10:10
Destination
Detail
Address
Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005
No.
DDD EEE i-FAX
Addr Entry
0009 0010
1/100
WSD Scan
III JJJ
Color/ Advanced Program
Image Quality Setup
10/10/2010 10:10
1
Press the Send key.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Place the originals on the platen.
3
Press [E-mail Addr Entry] and then [E-mail
Address].
NOTE:
Destinations can be specified using the
Address Book or the One Touch Keys. Refer to
Specifying Destination on page 3-40.
4
Enter destination E-mail address and press [OK].
5
Press [Next Dest.] and repeat step 3 to specify the
destination. Up to 100 e-mail addresses can be
specified.
NOTE:
When [Add to Addr Book] is displayed, the
destinations are registered in the Address Book.
6
Press [OK]. The destinations are registered in the

destination list.

7
Check the destination list.
Select a destination and press [Detail/Edit] to check
and edit it.
Select a destination and press [Delete] to remove
the destination from the list.
3-24
Basic Operation