Kyocera 5550ci Operation Manual page 436

Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item
Immediately *
Subsequently
Alert Only
* The next job will be prohibited in sending or in storing in the box.
Use the procedure below to apply the restriction limit.
Default Counter Limit
When you add a new account, you can change the default restrictions on the number of sheets used. You can
set any number from 1 to 9,999,999 in 1-sheet increments.
The items that can be set differ depending on whether [Split] or [Total] is selected for Managing the Copy/Printer
Counts on page 10-24.
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job
will be rejected.
Job continues while displaying an alert message.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. Refer to Adding a User on
page 10-5 for the default login user name and
password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting and then [Change] of Apply Limit.
5
Select [Immediately], [Subsequently], or [Alert
Only].
6
Press [OK].
10-26
Description
Management