Repeat Copy Box - Kyocera 5550ci Operation Manual

Repeat Copy Box

Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Use the procedure below to specify the maximum number of stored jobs.
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
Status
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below to print a document.
Repeat Copy
Name Date and Time
2008101000101002 10/10/2010 10:10
Print
Status
(0 - 50)
32
job(s)
Cancel OK
10/10/2010 10:10
Size
21 MB
001/001
Detail
Delete
Close
10/10/2010 10:10
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Job Box, [Change] of Repeat Copy Job
Retention.
3
Use the [+] and [–] keys or the numeric keys to
enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
NOTE:
If you enter a value of 0 (zero), no jobs are
stored.
4
Press [OK]. The maximum number of stored jobs is
set.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
4
Select the document to print and press [Print].
5
If the document is protected by a password, enter
the password using the numeric keys.
6
Press [Start Print] to start printing.
The Repeat Copy box job will be deleted when the
main power switch is turned off.
7-16
Document Box