Before You Begin - Getinge 600 Series Installation Manual

BEFORE YOU BEGIN

INS 61301607027 Rev A US
SECTION 3 PACKAGING
The Getinge 600 Series Sterilizers are shipped fully assembled. Only
qualified Getinge service representatives or personnel trained by Getinge
should install the sterilizer.
WARNING
POSSIBILITY OF INJURY: The sterilizer is top-heavy and could tip when
you remove it from the shipping base.
Use caution when moving the unit to ensure there is no accidental tipping
causing damage or bodily injury.
SHIPPING WEIGHT
Refer to the following chart for the weight of the crated sterilizers:
Chamber Length
Single Door
Double Door
LIFTING EQUIPMENT
A pallet jack is required to remove the sterilizer from its shipping skid. Once
the skid is removed, the sterilizer can be rolled on its casters to the room
where it will be located.
CLEARANCES
The uncrated sterilizer is 39.5 inches (1003 mm) wide and 73.5 inches (1867
mm) tall. The maximum length of the sterilizer is 65.75 inches (1670 mm).
26 in. 39 in.
1,160 lb 1,365 lb
(526 kg) (619 kg)
N/A 1,508 lb
(684 kg)
51 in.
1,506 lb
(683 kg)
1,649 lb
(748 kg)
3–1