Table of Contents
Advertisement
Drawing a Line
1.
Move the whole line.
Move the line by tilting the ENTER key in the desired direction
and press the ENTER key to fix the position.
2.
Fix the start point (the white square mark on the line).
Move the line by tilting the ENTER key in the desired direction
and press the ENTER key to fix the position.
Press the C key before pressing the ENTER key to go back to the
previous step.
3.
Set the end position (the black square mark) of the line.
Move the end point by tilting the ENTER key in the desired
direction and press the ENTER key to fix the position. Press the
C key before pressing the ENTER key to go back to the previous
step.
Drawing a Polygon
1.
Move the whole polygon.
Move the line by tilting the ENTER key in the desired direction and
press the ENTER key to fix the position.
2.
Fix the start point (the white square mark on the polygon).
Move the line by tilting the ENTER key in the desired direction and
press the ENTER key to fix the position. You can set four vertices
of the rectangle by repeating this operation.
51
Advertisement
Table of Contents
