14.2.3 Displaying an Image Profile
To display the grayscale level of the image in the linear area in a graph form:
1.
Adjust the position of the camera to display the inspection object or the object with feature on the
monitor screen.
2.
Select "Setting Help" > "Image Profile" from the menu bar.
3.
Press the B key and select "Area".
4.
Move the yellow lines to the position at which you want to display grayscale level and set the start
position first, then the end point.
The graph as shown below appears.
If you want to change the directions or the positions of the lines, press the B key again and select "Area" or
"Chg. Direction".
313