Parallel Ports; Wiring To The Terminal Blocks - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

3.1 Parallel Ports

3.1.1 Wiring to the Terminal Blocks

Output terminal block
Terminal block for power supply input
About terminal block
The PV310 is equipped with the attachable input/output terminal blocks. Use fittings and cables show in the
tables below.
Terminal block Manufacturer
socket
Phoenix Contact
Tightening Manufacturer
fittings
Phoenix Contact
Acceptable Wire Size
(Twisted wire)
AWG#24 to 26
How to Wire
1 Remove the wire shield.
28
Model No.
Input MC1.5/18-ST-3.5
Output MC1.5/16-ST-3.5
Model No. Conductor surface area
(cross-section)
SZ 0.4 x 2.5 0.4 x 2.5 mm
Conductor surface area (cross-section)
0.3 to 1.25 mm
2 Insert the wire into a
terminal block hole until it
stops and screw it down.
Product No.
1840528
1840502
Tightening torque
2
Less than 0.25 N•m
2
3 When connecting multiple
wires, twist them together
before inserting.