Section Ii Fax; Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-685CW User Manual

5

Sending a fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in green.
The LCD shows:
Fax Resolution
Contrast
Speed Dial
Outgoing Call
FAX/TEL
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 36.)
Contrast (See page 35.)
Speed Dial (See page 58.)
Outgoing Call (See page 59.)
Caller ID hist.
(See page 59.)
Broadcasting (See page 34.)
Delayed Fax (See page 37.)
Batch TX (See page 37.)
Real Time TX (See page 36.)
Polled TX (See page 82.)
Polling RX (See page 80.)
Overseas Mode (See page 37.)
Scan Size (See page 33.)
Set New Default (See page 38.)
Factory Reset (See page 38.)
32
5
Standard
Auto
Fax Start Press
When the option you want is highlighted,
press OK.

Faxing from the ADF

a
Press (Fax).
b
Put the document face down in the ADF.
(See Using the ADF on page 10.)
c
Enter the fax number using the dial pad
or Speed Dial.
Note
You can preview a fax message before
sending it by pressing Fax Preview.
(See How to preview an outgoing
fax on page 72.)
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full, it will be sent in real time.

Faxing from the scanner glass

You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for colour faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
5
5
5