Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-685CW User Manual

13

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
01
1
Quality
Enlarge/Reduce
Ratio:
Paper Type
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press a or b to scroll through the Copy key
options.
Quality (See page 85.)
Enlarge/Reduce (See page 85.)
Paper Type (See page 88.)
Paper Size (See page 88.)
Brightness (See page 87.)
Contrast (See page 88.)
RED Adjust (See page 88.)
GREEN Adjust (See page 88.)
BLUE Adjust (See page 88.)
Stack/Sort (See page 87.)
Page Layout (See page 86.)
Set New Default (See page 89.)
Factory Reset (See page 89.)
84
13
13
Normal
100%
100%
Plain Paper
Copy Start Press
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See Mode Timer on page 22.)

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 10.)
c
Press Mono Start for Monochrome
copy or Colour Start for colour copy.

Making multiple copies

You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 10.)
c
Enter the number of copies you want.
d
Press Mono Start or Colour Start.
Note
To sort the copies, press a or b to choose
Stack/Sort. (See Sorting copies using
the ADF on page 87.)

Stop copying

To stop copying, press Stop/Exit.
13
13
13
13