Installing your multifunction to your
network for the first time (11 pages)
Summary of Contents for Canon PIXMA MP499
Next >> << Previous Obtaining Your Network Key PIXMA MP499 Windows OS...
<< Previous Next >> Obtaining Your Network Key PIXMA MP499 Windows OS Introduction Download the Canon PIXMA Wireless Setup Assistant Using the Canon PIXMA Wireless Setup Assistant Troubleshooting...
If you are unable to proceed past the Access Points screen during wireless setup because the required Network Key is not known, you may be able to retrieve the information using the Canon PIXMA Wireless Setup Assistant. NOTE: The Wireless Setup Assistant is supported on the following operating systems only: •...
Next >> Wireless Setup Assistant Download the Canon PIXMA Wireless Setup Assistant To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.)
Download the Canon PIXMA << Previous Next >> Wireless Setup Assistant Step Three In the Software section, click the Download icon link to download the file CanonAPChkTool. Step Four On the next screen, read the information and instructions and click I Agree - Begin Download...
Using the Canon PIXMA << Previous Next >> Wireless Setup Assistant Using the Canon PIXMA Wireless Setup Assistant Step One Open the Access Points window. If the Access Points window is closed: 1. If you are installing the latest driver from download, re-run the the driver/network installation by double-clicking the driver file you downloaded previously.
Using the Canon PIXMA << Previous Next >> Wireless Setup Assistant Step Two Step Three Double-click the downloaded tool for confirming the Canon Read the License Agreement, and then click Yes when you accept the PIXMA Wireless Setup Assistant CNMNPHLP. agreement.
<< Previous Next >> Wireless Setup Assistant Step Four 1. The "Canon PIXMA Wireless Setup Assistant" tool is launched. 2. Confirm that the same access points are listed in the following window as the ones in the Access Points window (Step One).
Or, while holding the "Ctrl" key, press the "V" key on your keyboard. 4. Click Connect. When access point names are the same, you can select any one of them. The tool "Canon PIXMA Wireless Setup Assistant" is launched. Step Six...
Troubleshooting << Previous Next >> Troubleshooting If either of the dialog boxes pictured below are displayed, the entered network key may not match with the access point you specified. Click the OK or Back button to open the Access points window. Confirm the correct access point name and repeat Steps Four through Six.