Chapter 8 Daily Care - Fujitsu ScanSnap S510M Operator's Manual

Chapter 8
Daily Care
This chapter describes how to clean the ScanSnap.
WARNING
8.1 Cleaning Materials .............................................................................................. 206
8.2 Cleaning the ScanSnap Exterior & Stacker...................................................... 207
8.3 Cleaning the Inside of the ScanSnap................................................................ 208
8.4 Cleaning the Carrier Sheet................................................................................. 212
•
Before you clean the ScanSnap, unplug the power cable from the
power outlet from the computer to prevent from fire or electric shock.
•
To avoid injuries, do not place the internal parts (such as the Pad
ASSY and pick roller) in areas where small children can reach.
•
Do not use any aerosol sprays or alcohol based sprays to clean the
ScanSnap. Dust blown up by strong air from the spray may enter the
inside of the ScanSnap. This may cause the ScanSnap to fail or
malfunction. Sparks, caused by static electricity, generated when
blowing off dust and dirt from the outside of the ScanSnap may cause
a fire.
ScanSnap S510M Operator's Guide
8
205