Installing Cardiris - Fujitsu ScanSnap S510M Operator's Manual

■ Installing Cardiris

Install Cardiris from the "Cardiris™ Setup CD-ROM" supplied with the ScanSnap, by following
the procedure below.
Operation
Prepare the Cardiris CD-ROM.
1. Insert the "Cardiris™ Setup CD-ROM" into the CD-ROM drive.
2. Double-click the "Cardiris 3.6 for ScanSnap" on the desktop.
3. Double-click the "Cardiris 3.6 for ScanSnap" icon.
⇒
A screen of Cardiris installation appears.
4. Scroll down and read License Agreement to the end. Then click the [Continue] button,
and install Cardiris, by following the instructions on the screen.
By default, Cardiris is installed on the Applications Folder.
5. After installation, Mac OS X restarts, and the Cardiris icon appears on the Dock
menu.
6. Check that Cardiris can be started by clicking the Cardiris icon.
After confirming the application startup, exit Cardris.
ATTENTION
12
This operation is required for ScanSnap interaction with Cardiris.
This operation must be performed before installing ScanSnap Manager.