Fujitsu ScanSnap S510M Operator's Manual page 129

4. Click the close button
⇒
The "ScanSnap Manager - Scan and Save Settings" window closes.
•
To start scanning right after selecting the profile, press the [SCAN] button
HINT
on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan
and Save Settings."
•
Changes you have made in the above procedure take effect from the next
time you scan documents using the profile.
For details on how to change settings, refer to
Settings" (page
•
"Scan to Folder" profile can be selected by selecting "Scan to Folder" in the
"Select a Profile" window which pops up when clicking the ScanSnap
Manager icon
Operation
5. Load the document onto the ScanSnap.
For details, refer to
43) and
6. Press the [SCAN] button
⇒
Scanning is started.
⇒
When scanning is complete, the preview window appears.
Operation
7. Verify a scanned image in the preview window.
You can also change file names and destination folders and specify whether to state a path to a
destination folder in an e-mail message to notify other members of it.
Window size is scaled up or down by dragging the lower right corner of the window with the
mouse cursor. The previewed image is also scaled up or down according to the window size.
5.2 Saving Data in the Specified Folder
in the upper left corner of the window.
80).
.
"3.2 Paper Sizes of Documents to be Scanned" (page
"3.3 Loading Documents" (page
.
ScanSnap S510M Operator's Guide
"4.3 Saving Scanning
46).
5
107