Chapter 2 Connecting Scansnap - Fujitsu ScanSnap S510M Operator's Manual

Chapter 2
Connecting ScanSnap
This chapter describes how to connect the ScanSnap to your computer.
Install ScanSnap Manager on your computer before connecting the ScanSnap scanner.
ATTENTION
For details about the specifications of the ScanSnap such as the installation
area, refer to
2.1 Installing the Supplied Software ........................................................................... 6
2.2 Connecting the ScanSnap to Your Computer .................................................... 20
•
Be sure to install ScanSnap Manager before connecting the ScanSnap to
your computer. If you connect the ScanSnap to your computer before
installing ScanSnap Manager, the ScanSnap will not operate correctly.
•
When the ScanSnap is connected to your computer, other ScanSnap models
(ScanSnap fi-5110EOXM/S500M/S300M) or another S510M cannot be used
on the same computer.
"Appendix C Installation Specifications" (page 237)
ScanSnap S510M Operator's Guide
2
.
5