Chapter 4 Daily Care - Fujitsu fi-6130 Operator's Manual

Chapter 4 DAILY CARE

fi-6130 / fi-6230 Image Scanner Operator's Guide
Chapter 4 DAILY CARE
This chapter describes how to clean the scanner.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/04/c04.htm [2008/10/30 15:15:25]
CAUTION
When operating the scanner, the ADF's glass becomes very hot.
Before you clean inside the scanner, turn off its power and unplug the AC adapter from the
outlet. Wait for at least 15 minutes for the ADF glass to cool down.
Do not turn off the scanner when you clean the Feed and Eject rollers.
WARNING
Do not use any aerosol sprays or alcohol based sprays to clean the scanner.
Dust blown up by strong air from the spray may enter the inside of the scanner. This may
cause the scanner to fail or malfunction.
Sparks, caused by static electricity, generated when blowing off dust and dirt from the
outside of the scanner may cause a fire.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
TROUBLESHOOTING
CONTENTS MAP
TOP