Scansnap Manager Menu - Fujitsu ScanSnap S510M Operator's Manual

■ ScanSnap Manager Menu

This menu appears when clicking and holding down the ScanSnap Manager icon
In this menu, you can perform the following:
Item
Duplex scan
Simplex scan
Settings
Use Quick Menu
Select a Profile
Profile
Management
Check
consumable
supplies
Help
Keep In Dock
Open at Login
Show In Finder
Hide/Show
Quit
Both the front and back sides of the document are scanned at the same
time. Scanning is performed according to the settings configured in the
"ScanSnap Manager - Scan and Save Settings" window.
Only one side of the document is scanned at one time. Scanning is
performed according to the "ScanSnap Manager - Scan and Save
Settings" window.
The "ScanSnap Manager - Scan and Save Settings" window appears.
Settings configured in this window are used when scanning is performed
with a [SCAN] button
⇒
Refer to "4.2 Changing Scanning Settings" (page
You can switch between Quick Menu Mode and Profile Mode by marking/
clearing this.
You can select an operational mode that is enabled upon scanning with a
[SCAN] button press.
⇒
Refer to "3.1 Flow of Operations" (page
The "Select a Profile" window appears. For details, refer to
Profile" window" (page 52).
The "Profile Management" window appears. You can edit profiles.
⇒
Refer to "4.3 Saving Scanning Settings" (page
The "ScanSnap Manager - Check consumable status" window appears.
Reset consumable counters to 0 after you replace consumables.
⇒
Refer to "9.1 Replacing Consumables" (page
You can view the Help topics, the version information of ScanSnap
Manager.
You can add the ScanSnap Manager icon
Marking this sets to automatically start up ScanSnap Manager when Mac
OS X is started up.
You can view the contents of the "ScanSnap" folder with Finder.
You can hide and re-show all ScanSnap Manager windows on the
desktop.
You can quit ScanSnap Manager.
ScanSnap S510M Operator's Guide
4.1 About the ScanSnap Icon
Function
press.
26).
80).
214).
to the Dock menu.
.
53).
""Select a
51
4